1950 Ferrari 195 Inter

This was a touring-type version of the 195 S, with a more powerful yet more flexible engine which made driving easier for clients unused to extreme performance.

Touring, Ghia and Ghia Aigle (the first foreign coachworks to take an active interest in a Ferrari) created a number of different versions, some of which proved to be quite successful in GT racing.

The most popular versions of this model, however, were those by Vignale, who produced some stunning personalised coupés for the most exclusive clientele.

Like the 166 Inter series, the 195 variant featured independent front suspension via a transverse leaf spring, with a rigid axle and semi-elliptic leaf springs at the rear, and Houdaille lever shock absorbers all round. There was a concurrent 195 Sport model, which was built in the even chassis number competition car range.

The V12 engine was again based on the original Giacomo Colombo design for the 125 model in 1947, but was enlarged in capacity by almost 25% from that in the 166 model to 2431 cc. This was done by increasing the bore diameter to 65 mm, whilst retaining the 58.8 mm stroke of the 166 engine.

As with the 166 Inter, the standard induction wear on the 195 Inter engine was a single twin choke carburettor, but some examples received a triple twin choke carburettor set-up, as with the earlier model.

Some 166 MM competition models were upgraded to 195 engine size specification, as the increased capacity provided more power, and helped them to remain competitive on the race track. Once again the engine featured a twin distributor and coil ignition system, with a single spark plug per cylinder, and wet sump lubrication.

Ferrari 195 Inter Technical Specifications

Year of Manufacture – 1950

ENGINE
type front, longitudinal 60° V12
bore/stroke 65 x 58.8 mm
unitary displacement 195.08 cc
total displacement 2341.02 cc
compression ratio 7.5 : 1
maximum power 96 kW (130 hp) at 6000 rpm
power per litre 56 hp/l
maximum torque
valve actuation single overhead camshaft per bank, two valves per cylinder
fuel feed single Weber 36 DCF carburettor
ignition single spark plug per cylinder, two coils
lubrication wet sump
clutch single-plate
CHASSIS
frame tubular steel
front suspension independent, unequal-length wishbones. transverse leaf spring, Houdaille hydraulic shock absorbers
rear suspension live axle, semi-elliptic springs, trailing arms, Houdaille hydraulic shock absorbers
brakes drums
transmission 5-speed + reverse
steering worm and sector
fuel tank capacity 82 litres
front tyres 5.90 x 15
rear tyres 5.90 x 15
BODYWORK
type two-seater coupé
length
width
height
wheelbase 2500 mm
front track 1270 mm
rear track 1250 mm
weight 950 kg (dry)
PERFORMANCE
top speed 180 km/h
acceleration 0-100 km/h
0-400 m
0-1000 m

Ferrari 195 Inter Valuations

In 2018 a 195 Inter sold for over £650,000 but the year before one sold for £900,000.

Ferrari 195 Inter Servicing